372 Type 37mm 3 Piece Dial with Sub Dial (SOLD OUT)

This dial is 37mm it is made to fit the Modern Vintage 372 Case (available on this website).

This dial is not sold separately: Please Note these dials are made in limited batches and are only sold as part of the 372 case set (Case and Dial). Sorry I cannot supply only the dial.

There is no Plexi with this type of dial. To make this Dial you will require an inner plate (available see drop down box).This plate is optional and is available with or without lume. 

Text Colour:  If you choose to add this option the colour is mxed from 3 different colours and applied by hand. It is water proof when applied and is a Gold/Yellowish colour (the text is not gold).

Inner Plate: This plate is available from the drop down box. It is the plate that sits inside the dial and has the Lume and Colour applied to it (lume and colour is optional).

How to build. Take the Front Dial (dial with text). Using epoxy glue (2 part glue), fix the Inner Plate (the part with lume) to the inside of the dial, make sure the plate is flush (tight) against the rear surface of the dial. Once the epoxy has set add 4 or 5 large blobs of epoxy to the back of the Inner Plate. Now fit the outer Backing Plate (the part with dial feet) to finish the dial. Note there is a gap between the Inner Plate and the Backing Plate you dont need to fill all this gap with epoxy just make sure there are 4 or 5 spots of epoxy so that the backing plate sits solid.