Contains 60 Clear Self Adhesive Pieces of Tape used for sticking dials...
New
MM Dial for the 6152 (with Crown Guard)
This product is no longer in stock
Warning: Last items in stock!
Availability date:
MM Pantograph Engraved (6152 version)
MM Dial for the 6152 (with Crown Guard)
Recipient :
* Required fields
or Cancel
Quick Points:
1) Dial Thickness 2mm thick (37mm diameter)
2) The indices (numbers) do not have a Plexi
3) Indices (numbers) have optional Resin (with or without)
4) Engraving is by Hand controlled Pantograph (the same as genuine dials)
Note:
This dial is for the 6152 Case (with Crown Guard) The Indices (numbers) on the MM 6152 Dial are thicker (wider) than the MM Dial used on the 6154 Case (no Crown Guard Case). Make sure you use the correct MM Dial. (A different MM dial is available for the 6154 Case)
Whats included with the DIY Dial
1 X Anodized Dial Front
Acid Aged Anodizing dial surface
1 X Internal Plexi to hold the Lume (plexi's are internal and should never be visible)
1 X Standard Backing Plate
Whats not included or what you have to do.
Fill Plexi with Lume
Add any colour to lume ie orange or darker yellow
Sometimes the thickness of the internal Plexi needs to be adjusted, rub on sandpaper to get the perfect fit
Fit Backing Plate (use epoxy glue to assemble)
No Resin (resin kit is available on this website)
Optional items you can add:
Add Resin to the Indices (numbers)
Add Dial feet (616-6497-3601) to the Backing Plate
The Original 3646 Dial History (see links below):
Genuine Vintage Panerai Dials were Pantograph engraved (CNC engraving was not invented during this time period). Pantograph Engraving is skillful, the machine is hand operated and the operator controls the direction and depth of cut created by the cutting tool. The engraving should not be perfect unlike CNC (too neat), genuine dials had small imperfections often created by the different engravers that engraved the dial.
1) Dial machined from a solid aluminium bar
2) Dial Indices machined
4) Dial Surface Textured
5) Dial surface anodized
3) Dial text (optional) Pantograph engraved
6) Resin kit sold separately (numbers)
8) Internal plexi machined on a lathe from a solid bar
9) Plexi recesses machined
11) Backing plate cut from brass
12) Dial feet soldered to backing plate